Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes to be able to reinforce the free rock mass. The most grain measurement can’t exceed zero.2 mm.
Grouting pump operation and maintenance is simple, secure and dependable. This pump is used in mines working beneath tough conditions as a result of it’s reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base body and stand, strain gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it works
Pneumatic strain within the air cylinder exerts a high strain on the grout combination which leads to ejection of grout with a excessive stress and velocity. The valves of the air cylinder within the pump operate automatically to actuate the cylinder. nuova fima pressure gauge ราคา strikes the plunger up and down to complete the pumping cycle.
Pneumatic grout pump may be driven even without Electrical energy supply in remote areas through the use of engine pushed compressor.
Applications
The pump is majorly used in construction and mining business for injecting material into extensive and medium size hole in beams, columns ,basement walls and flooring, raise shaft concrete wall fill-up and so on. In mining industry it is used to replenish cement answer where there is a hole exists between construction and rock and for soil stabilization.
Detachable design tends to simple upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is widely utilized in tunnels, coal mine, bridges and dams, constructing basis, and other underground initiatives, and inflammable, explosive websites and other dangerous environment.
It has utility in chemical trade additionally to pump out chemical slurries.
The pump is electrical energy free so, can be used at any web site condition whether it is rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the final quantity of the grouting volume is 8 or10 times of the amount to begin with. And the final grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and circulate may be adjusted according to the necessities of grouting,(The circulate of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is mainly used for highways, railways, water and electrical energy, development, mining etc. ground/underground building.
Benefits
Mining Pneumatic Grouting pump has the benefits of low power consumption, small vibration, low noise, small size, high efficiency, dependable efficiency, strain and circulate management, long life and so forth. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump is also Light weight and with a wheelie design it might be carried easily. It is designed for easy operation and low upkeep. Last but not least its spare parts are simply out there.
Share