Filter monitoring is a core task of differential pressure gauges ? the differential pressure increases when the filter becomes clogged. The measuring instruments thus signal once the filter should be cleaned or replaced. The efficiency of such a solution can be illustrated by the exemplory case of WIKA pressure gauges of the DELTA-line series in water treatment.
With microswitch and operating display ? the WIKA model DPGS40 differential pressure gauge enables safe filter monitoring.
In the water industry, reverse osmosis is really a widely used process to separate water from unwanted substances. The corresponding filtration systems use semi-permeable membranes.
For filter monitoring, a global solution provider for the treatment of drinking, industrial and wastewater uses WIKA model DPGS40 differential pressure gauges in its plants in Germany. Impressive measures the pressure on both sides of the membrane.
Timely intervention at the filter
In addition to the on-site display of the differential pressure, the pressure gauge has an integrated microswitch. This sends a warning signal to the control centre whenever a defined limit value is reached. This enables the operator to set up for timely cleaning or replacement of the filter. Due to its mechanical measuring principle, the filter monitoring also functions reliably in case of a power failure.
Continuous monitoring
Prompt intervention at the filter is essential for just two reasons. Firstly: It prevents possible contamination of the water. Secondly: The operator saves energy through the help of continuous filter monitoring. The more fouled a filter is, the harder the pump must work for the required media flow.
Integrated working pressure indication
The customer chose the DELTA-line pressure gauge for filter monitoring for another reason ? as a result of integrated working pressure indication. This information is essential to the plant manager because it allows him to draw conclusions about the respective pump performance. To acquire this information without the two-in-one solution, he’d otherwise have had to create yet another measuring location.
Further measuring requirements
In addition to filter monitoring, the differential pressure gauges of the DELTA-line series are suitable for tasks in level and flow measurement. In various versions, they cover a variety of applications. DPGx instruments can be found with analogue signal output or more to two microswitches. All have ATEX approval. Gleam variant with SIL certification and DNV-GL approval for marine applications.
Note
An overview of all instruments in the DELTA-line series can be found in our flyer. Further technical information on the products can be found in the pressure gauge and contact pressure gauge products on the WIKA website. For Funny who have any questions, your contact will gladly help you.
Also read our article
Filter monitoring: An essential component for energy-efficient operation